Dahua LNPR Camera Guide

Dahua LNPR Camera Guide


Instructions

Physical Setup & Mounting
Learn how to physically install the camera and recommendations for best mounting practices

> LPR Camera Physical Setup & Mounting
> ITC413 Installation Tutorial Pole & Wall Mount
How-to Configuration
Follow the camera's built-in Guide to setup and configure License Plate Capture

> LPR Camera Quick Configuration Guide

ITC215 and ITC237 Initial Setup

ITC431-RW1F-IRL8 Initial Setup

ITC413-PW4D-Z Initial Setup

LPR with DSS Software
Learn how to integrate Dahua LPR products to DSS Software

> How to configure LPR camera to DSS
> How to Setup Entrance & Parking Management in DSS

Troubleshooting

Manuals

Installation

This section covers recommendations for physical installation of the device - including pole distance, height, and camera angle.

The camera can be installed in the center or side of lanes, with different recommended distances for mounting.

Mounting height and the best distance to capture:

Installation MethodCamera HeightLane WidthSnapshot Distance (min, max)Best distance to capture
ITC237-PW6M3m3.5m7-14m9-12m
4m3.5m-7m8-16m14-16m
5m3.5m-7m9-18m14-18m
6m3.5-7m10-30m25m

Center

If the camera is installed in the center of the lane, the relationship between the installation height h and the capture distance x is X≥1.7*H.

For example, in the case of 6m height in the standard scheme, the minimum capture distance is 10.2m.

  • The camera is installed in the center of the scene
  • The pole is 6 meters high
  • The figure below shows a 2 lane installation

Side

If the camera is installed in the side of the lane, the relationship between the installation height h and the capture distance x is X≥1.7*H.


  • The camera is installed on the right side of the scene
  • The pole is 6 meters high
  • The figure below shows a 2 lane installation

Limitation

  • ITC devices do not have motion detection